Using Bluetooth in the Dance studio & Large PA

How to use a Bluetooth connection in the Dance Studio, the Large PA

In the Dance Studio

1} Open the large cupboard doors:

2} This is the device:

Volume control comes from the user’s device (phone)

3} Confirm the device is connected to mains power and turned on.

4} Open settings on your device and go to Bluetooth:

1. a) Look for a device called Bose SoundTouch C4A62C

In the Linbury

To transfer; the device must be disconnected from the Dance Studio cupboard by:

1. Unplugging the mains plug
2. Unplugging the Red and White plugs

In the Linbury:

• Open the cupboard next to the lectern
• Connect the mains plug into the mains adapter in the floor of the cupboard
• Connect the Red & White plugs as shown in the image below.
• Then follow 4a on the previous page

You can set the volume on the front panel after opening the door.

Using the Large PA System